Filter By:
Hubs

$76.90 - $90.90
Reliability meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

$85.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from mtb to road and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release, 12mm, and 15mm endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity in our modern world.
- Weight: Disc Brake: 164g
- Includes 12mm, 15mm endcaps and quick release skewer
- Non-Drive Side Center To Flange Disc Brake: 21mm
- Drive Side Center To Flange Disc Brake: 36mm
- Non-Drive Flange Diameter Disc Brake: 58mm
- Drive Side Flange Diameter Disc Brake: 45mm

$130.00
Hubs typically seem to fall into two general categories: light and very expensive or heavy and cheap. With this typical bike industry paradigm, we saw an opportunity. You see, for years we've been using high-end geared hubs from the manufacturer of our track offerings on our personal bikes. They are very lightweight (peep the specs) and just plain work. We decided to finally make those hubs available to you and corner the market in our own category: lightweight, affordable, and incredibly practical.
We've ridden them on all kinds of bikes from the Electric Queen to the Mr. Pink and we're in love. They are reliable, dang light and very reasonably priced.
We offer the Go-Devil in a minimal amount of configurations and ship them with all the necessary endcaps and a quick release skewer, future proofing them in case you want to use them on various bikes over the years. Quick Release lever and 12mm thru-axle endcaps are included.
On all models we spec high-quality made in Japan stainless-steel sealed bearings.
The splined freehubs have 28 points of engagement, the XD driver has 56.
Oh, and we've got polished options as well. Kind of a big deal because polished hubs have become a rarity.
- Weight: 277g
- Includes 12mm thru-axle end caps and quick release skewer
- Drive Side Center To Flange 18.5mm
- Non-Drive Center to Flange 34mm
- Non-Drive Flange Diameter 58mm
- Drive Side Flange Diameter 49mm

$209.99
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm

$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available

$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included
Page 1 of 1