Packs/Racks/Baskets

Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.

Foul weather is about to lose its sway over your two-wheeled adventures. Banjo Brothers' Waterproof Pannier is tailor-made for wet commutes and trips around town. The rugged nylon exterior fends off wear and tear while the welded-seam liner and roll-top closure keep the contents dry. It attaches easily to most rear racks (sold separately) via a quick-release mount so you can pop it off and bring it with you. And if you're riding in the rain, the reflective accents bring a little extra visibility and peace of mind.

Milk rate inspired basket that mounts to fit most rear bike racks. Quick release by pulling side handles away from bike. Includes molded in handles and mesh elastic netting to hold contents. Made of high Impact PP with reflective rear decal. Size is 12.25" x 10.5" x 6.75" and 850 cubic inches of volume.

Banjo Brothers makes the Commuter Backpack for riders who go out everyday, in any weather. Its roll-top outer is made from ballistic nylon with a welded-seam liner that's utterly waterproof. Wide, padded straps evenly distribute weight comfortably on the bike or off, while chest and waist straps add stability. It sits low on the back to reduce blind spots. And, there are two quick-access side pockets, organizing pockets, a shoulder-strap-mounted phone holder, large reflective stripes, and a taillight tab.

- Waterproof (IPX3) - Elastic cord ontop and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible: MIK system

Everything you need for an all-day ride, close at hand. The Buddy Handlebar bag mounts to your handlebars with hook-and-loop attachment along with bars and frame. Features a large main compartment, separate dual-accessible phone compartment, lanyard, and easy-to-grab zipper pulls. Opens up completely for easy access. Loop MOLLE on the front to attach different items. Look around for some cool hook patches that can attach to the front of the bag. - 5 multi-positional straps for mounting - Straps are extra-long, cut to the desired length - Fits the largest phones with large cases - Phone is operable & audible while in the case - Made of 840 denier nylon & polyester - 11" x 5" x 4"

- Fits lengthwise on the luggage carrier of your bike. - Easily attached with supplied mounting hardware. - Ideal for carrying shopping, daily essentials or school supplies. - Weatherproof with a reinforced frame. - Classic black color.

A set of no-nonsense panniers for the everyday commuter. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 55.3 L / 3372 cu in (pair) - Weight 1520g / 3.35 lbs (pair) - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner on back-plate protects contents from scratches and improves internal visibility - Daisy-chain webbing for additional tie-down options. - Rixen & Kaul VARIO 1 hooks are adjustable from 6mm-16mm. - The Rixen and Kaul lower SLIDE-LOCK rail and FLIP-LOCK hold panniers firmly in place

Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb

Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.

Need more carrying capacity for running errands? Then check out Topeak's Front Basket. It easily attaches to you bike's handlebars and holds all your groceries or whatever else you pick up. And, the handle makes this basket extremely portable.

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

Free your hands up for steering and stuff. - Mounts directly to the headset of your bicycle - Perfect fit for the Electra basket totes - Multiple color options available - Proprietary design by Electra - Maximum Load Capacity: up to 22 LBS or 10 KG - 38 W x 28 L x 24 H cm (Outside Diameter) - Designed to fit most 24", 26" and 700c wheel Electra models - Includes mounting brackets for bikes with either a 1" or 1 1/8" Headset

BiKASE's Beetle Top Tube/Stem Phone Bag is perfect for your phone, wallet, keys, gels and other smaller items. This fine 600-denier nylon bag quickly and easily attaches to your bicycle frame top tube or your stem with its Velcro and shock cord mount. Your phone goes on top and there's a zip compartment below for your other goodies. You can operate your phone through the clear window. The Beetle accepts iPhones and Samsung Galaxy S3 and S4s and has a removable spacer to fit big or smaller phones.

Axiom's Market Basket LX is just the thing for running errands by bike. It's made with a tough steel frame and vinyl-coated steel mesh. It attaches to most racks (sold separately) with its adjustable, quick-release universal mount. And it boasts carrying handles so you can take it with you. You also get a place to easily attach a taillight (sold separately).

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

Axiom's Journey Rack is made of light, rugged aluminum. It is specially designed to handle even the largest and heaviest panniers (sold separately) with additional looped struts that prevent the bags from swinging into the wheel. It also has a platform on top, which adds strength and doubles as a mini fender.

If you have to carry a bunch of gear, you're going to need a front rack. Sunlite's Gold Tec Front Rack has a capacity of 40 pounds, turning your bike into a serious workhorse. It's made from tubular aluminum and mounts to most fork bosses.

Axiom's Market Basket is just the thing for running errands by bike. It boasts a tough steel frame and vinyl-coated steel mesh. It installs on almost any rack (sold separately) that has 7mm- to 10mm-diameter rails. You also get a place to easily attach a taillight (sold separately).

- Large padded main compartment with 2 internal mesh pockets - Two side zippered compartments - Rear accessory compartment - Top tie-down strap - Expandable top - Includes removable shoulder strap - Velcro mounting straps - Bag volume: 800 c.i. - Size: 12.6x5.5x6.7"

Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Add more utility to your Electra Cruiser with the Cruiser Classic Rack. This aluminum rear rack features a sturdy design and attaches quickly and easily so you can bring along nearly anything your heart desires.

The Expedition Frame Pack is designed for storing items within the main triangle, creating a lower center of gravity and enabling more natural bike handling. The frame bag securely fastens to the top tube with Velcro straps, and is useful for storing heavier items as part of a larger bikepacking setup. The result is an even, balanced load, making longer tours and multi-day trips more comfortable. The frame bag is equally useful when used on its own for storing essentials on a daily commute. It’s constructed from a lightweight fabric, custom milled to Apidura’s specifications and welded together at the seams to create a watertight seal. Zippers with protected closures ensure that kit stays dry, even in a sustained downpour. A battery lead/hydration hose port is handy for charging devices or staying hydrated on the road. Features - Two versions to suit both tall and compact head tubes - Interior storage pocket for organization - Lightweight waterproof laminate, developed specifically for Apidura - Carbon-friendly adjustable strap positioning - Protected battery/hydration hose port - Reflective graphics for increased visibility Materials - The frame bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. Care - Hand wash, using a mild diluted soap if necessary. Afterwards, let the Frame bag air dry. - Do not machine wash, machine dry, or iron.

Featuring composite construction, Lezyne's Caddy QR Mount provides a simple attachment to your seat rails. It's compatible with all Lezyne QR Caddys.

Made of durable polyester fabric and long known as an ideal pannier for extended tours in any kind of weather, the spacious Bike Packer Classic is now available with the QL2.1 rack mounting system. The advantage of this faithful companion at your rear wheel: greater transport comfort, stability and safety. - Panniers (pair) with classic lid closure for large packing volume - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 mounting system for racks with max. 16 mm tube diameter - 20 mm hook available as separate accessory (e.g. for E-bikes) - Reduction inserts for tube diameters 8, 10 und 12 mm with anti-scratch function preventing abrasion on the rack - Hooks adjustable without requiring tools - Lower hook rail made of two-component hard-soft synthetic with anti-scratch function protecting the rack - Including integrated inner pocket and shoulder strap - Due to its symmetrical form it is possible to use only one bag on left or right side - The dust flap - with easily operable pull cord - under the lid provides protection e.g. against water, dust and snow - The edge protector prevents contact with spokes and abrasion - Simultaneous use of Ortlieb Travel-Biker possible - Highly reflective 3M Scotchlite reflector - Easy to clean inside

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Pico, Medio and Gordo are our water, resistant extra durable range of Arundel seat bags. We make use of sonic welded seams and nylon fabric impregnated with thermoplastic polyurethane. Think frogman raft. The straps are also nylon and wider than usual, like seat belts in planes and cars. A wider strap means more Velcro area for better security. The materials we used cost more but in exchange, you have a seat bag that should last a good long time. All three are slightly roomier than our time proven corresponding sized Uno, Dual and Tubi. Medio - 33 cubic in, 5 X 3 3/4 X 2 in - Sonic welded seams - Wide 1 1/2 in nylon strap with extra Velcro - Fits an MTB tube or two 700c gravel tubes, plus gas, filler etc.

Versatility and simplicity is the virtue of this design. The rack deck can adjust fore and aft, but also flip over to better fit different sized bikes. - No frame mounts required - Performs well with trunk bags - Light and reflector mounting loop - Fits seatposts 22-32mm in diameter - Aircraft-grade 6061 aluminum tubing - 22 lb/10 kg carrying capacity

- A zippered frame bag to keep ride essentials like energy bars, gels, bacon, or other tasty treats within reach - Attaches with 3 short Velcro straps to the top tube and head tube - Features zippered side pockets and gear loops to reposition the underside Velcro straps depending on frame style - Reflective details provide improved visibility in low-light conditions - Measures 4" x 7" x 2" (H x W x D) - 100% RECYCLED PRE-CONSUMER WASTE We process our residual materials from production and use them to develop sustainable products. - PFAS FREE This deuter product is free of intentionally used PFAS (per & polyfluorinated chemicals). deuter thus reduces the use of substances, that are known to harm the environment and health. For Outdoor products, PFAS are mainly used for water-repellant treatments. Instead, Deuter uses an alternative DWR (Durable Water Repellency) impregnation.